Pininfarina Pininfarina Hyperion (Based on RR Drophead Coupe)

[Bartek S.]

Named for a Titan in Greek mythology, the Pininfarina-etched Hyperion is designed to evoke memories of cars from the 1930s with its long majestic bonnet, short rear overhang and low rooflines. Based on the Rolls Royce Drophead Coupe, the changes needed to create the Hyperion include the removal of the rear seats and a shift in driving position, which is now 400mm further back in the Hyperion than in the Drophead.

To mimic the proportions of pre-war cars, Pininfarina had to extend the roof and shorten the rear end but apart from these changes the interior appointments remain intact. The bodywork is made of carbon fiber, while interestingly the doors are made of solid wood by craftsmen who usually reserve their services for luxury boats.
The car was designed by the Special Projects division of Pininfarina, who also created the one-off Ferrari P4/5 a couple of years ago for James Glickenhaus. The Hyperion was designed for Rolls-Royce collector Roland Hall, who made specific requests for the cars appearance and utility - including two compartments for small items such as hunting rifles, located in front of the windscreen.
While most of the interior remains intact, one change to the instrumentation has taken place - a watch has been specially designed for the Hyperion by Girard-Perregaux, and sits in the dashboard in a special cradle, but can also be removed and attached to a bracelet to be worn on the wrist.
The standard Drophead coupe features a 6.75L V12 engine developing a peak output of 453hp (338kW) and 531lb-ft (720Nm) of torque, which is enough for an electronically limited top speed of 155mph and a 0-60mph sprint of just 5.6 seconds. No major mechanical changes have been installed for the Hyperion.

 

[Deleted member 25]

I can't stop thinking that they have been very lazy on this one and choosed a very easy and cheap path.

 

[Centurion]

I can't stop thinking that they have been very lazy on this one and choosed a very easy and cheap path.

Cheap in what way? That they have just pimped a Rolls instead of designing en entirely new car?

 

[Deleted member 25]

Cheap in what way? That they have just pimped a Rolls instead of designing en entirely new car?

I am aware it's coachbuilding, but pinin is capable of much better. This is just a melting pot of very old and generic ways to design a classic.

 

[7saen]

I agree with shonguiz.
But I'm sure that The designers at Pininfarina had many proposals to offer, but the rich dude chose that one. It's his car eventually..

 

[Centurion]

But I'm sure that The designers at Pininfarina had many proposals to offer, but the rich dude chose that one. It's his car eventually..

True. The owner probably wanted something unique but yet recognizable and I have to say that the designers found the perfect balance. Finally Pininfarina creates something spectacular cause to be honest I haven't seen anything particularly eye catchy come out of their design studio the latest 5 years except for the Bridgecage. I found them to be severely overrated.

But this Hyperion is my new love, in fact I think is marginally outshines the Veyron Grand Sport. It wouldn't surprise me if other rich folks request one of these themselves. Would love to see it in black with white interior. Looks spectacular from this angle.

 

[SDNR]

^ I think you are right Hassan, it could inspire some individuals to commission special one-off cars .....maybe to be one of the toys on a new mega-yacht, for when the owner decides go ashore

 

[Bartek S.]

 

[Centurion]

It's interesting how the slowing of the character line and rear end can change the perception of a car. What has puzzled me about DHC is how noble, grand and aristocratic it looks as a result of the upwards sloping character line, making it look like a well nurtured British princess. The effect makes the car look like a yatch on land. Too bad I will never afford to take a DHC on a voyage through Kensington and Chelsea.

Either way the Hyperion is a very special car and highlights the fact that the pop culture image of the Phantom has somewhat tainted it's image, which is why the owner choose to take a new approach to exclusive luxury.

 

[Bartek S.]

Pininfarina Rolls-Royce Hyperion Officially Revealed

Press Release


Pininfarina presents the Hyperion, a one-off custom-built car derived from the Rolls-Royce Drophead Coupe which made its world debut at the Concours d’Elegance at Pebble Beach, America’s most important competition for historical classic and one-off cars and a prestigious annual event.

The car is named after Hyperion, one of the Titans of Greek mythology, to underline its architectural and figurative power.
It is not the first time that the Pininfarina Special Projects Division has designed a unique car from a standard production model. In the recent past Pininfarina has reinterpreted Ferrari engineering, as in the case of the P4/5 of collector Jim Glickenhaus, or Peter Kalikow’s Scaglietti “K”. In the case of the Pininfarina Hyperion, Roland Hall, a collector and the owner of a Rolls-Royce Drophead Coupe, asked Pininfarina to create a custom-built car that would evoke the appeal of the sumptuous cars of the 1930s. It might seem paradoxical, but today more than ever before, there is a desire on the part of a very elite clientele to return to the idea of the car as an artistic expression. As it was in the 1950s.

With the Hyperion, the team of designers and engineers of the Special Projects Division was able to express its creative skills and to apply Pininfarina expertise without limits, save that of coming as close as possible to the type of car that our customer had in mind. The result was a custom-built unit that is firmly rooted in the values of the Pininfarina and Rolls-Royce brands, with lines and dimensions that are hard to find in a 21st century model. The Hyperion takes up the legacy of other Rolls-Royces designed by Pininfarina, the Silver Dawn saloon of 1951, for example, or the Camargue coupe of 1975.

The history of Pininfarina offers plenty of examples of special cars built on “noble” bases. Which is why the company naturally welcomed Roland Hall’s proposal to work on a Rolls-Royce floorpan. For the new Pininfarina one-off, however, the Special Projects Division wanted a new idea, something absolutely unique, which only an individual in love with the car as an abstract, and not merely utilitarian, concept could appreciate. And so the Hyperion project was born, in the Autumn of 2007.

In terms of the styling, the first brainwave came when thinking of some of the cars of the 1930s, with their majestic, regal bonnets, and a body that surrounded the driver and a single passenger. Distinctive features of a car which, thanks to its strength and elegance, does not need to move to draw attention to itself.

Like all the cars designed by Pininfarina, the secret of the Hyperion lies in its absolute harmony between masses and volumes, and the perfect balance of every proportion.
Structurally, we moved the driving position further back (400 mm) and took out the rear seats. We designed a new hood, which folds behind the seats under a wood-lined cover. In front of the windscreen we created two compartments for small items or for sports equipment, such as Mr. Hall’s hunting rifles.

The bodywork is made of carbon fibre, while the details are applied using a technology adopted in boat building. The doors were made of solid wood by craftsmen who specialise in creating components for luxury boats. This is another aspect of the programme of Pininfarina special cars: offering customers unique stylistic and technical solutions that are not possible on mass produced cars.

Some of the best international firms contributed to the realisation of the project: Re Fraschini for the carbon, Isoclima for the glazed surfaces, Proxi engineering for the drawings of the car, Triom for the lights and headlights, Fondmetal for the wheel rims, and Materialise for components created using fast prototyping.

Romantic and noble. These two words sum up the styling of the Hyperion.
The archetype of the special car, an opulent two-seater roadster that conveys the luxury of the Rolls-Royce Drophead Coupé, from which it derives, at the highest figurative and architectural levels. At the same time, it harks back to the past, and the cars of the pre-war period that now populate the world’s most prestigious concours d’elegance.

To repeat the proportions of those unforgettable cars (a short tail end and majestic bonnet that “surges” forward), we had to extend the roof and shorten the rear end. To balance the volumes, the Pininfarina designers tried to achieve soft, fluidly flowing surfaces. The front sports the classic Rolls-Royce grille, which has been slightly inclined. A trapezoid plane creates a more aerodynamic dashboard, while the recessed Bixenon headlights and LED technology convey sportiness and elegance. The spectacular bonnet is underlined by the muscular, taut wings, while the line that embraces the front wheels is drawn back until it disappears into the hood cover, giving a sense of movement even when the car is stationary. This feature is counterbalanced by a small tooth under the door that runs towards the rear wheel. The shape of the rear end recalls Pininfarina’s legendary sports “berlinettas” of the Fifties and Sixties, with their cut-off tails, strongly inclined downwards, with a flat closure borrowed from boat-building.

The interiors were practically unchanged, maintaining the perfect sense of high luxury in the passenger compartment that distinguished the original car. One precious detail of the instrumentation underlines the unique environment: the watch designed specifically for the Hyperion by Girard-Perregaux, which can be removed from the dash and attached to a bracelet to be worn on the wrist.

Combining the excellence of a watch and a car that are out of the ordinary. This was the goal of the collaboration between Pininfarina and luxury Swiss watchmakers Girard-Perregaux. The meeting of two prestigious names that embody artisan tradition and cutting edge technology has created a refined timepiece with a sophisticated mechanism. Girard-Perregaux have personalised one of their sophisticated watches, the Vintage 1945 Tourbillion with gold bridge, for the Hyperion. Thanks to an ingenious anchorage system, this timepiece can be mounted on the car’s dashboard, or removed from its mount to slip on to its owner’s wrist.

The pure lines of the white gold case, inspired by a model of 1945, contain a gold bridge tourbillon. This mechanism, which is faithful to the original design created by Constant Girard-Perregaux in the 19th century, stands out for its complexity: only an expert watchmaker could assemble the cage that weighs just 0.3 grams, carrying no fewer than 72 elements. The automatic movement was painstakingly built by the company.
The Vintage 1945 Tourbillion with gold bridge blends perfectly with the Hyperion, starting from the colours of the face which match those of the bodywork. A sophisticated “spring-ball” system allows it to be extracted from the leather bracelet so that it can be mounted on the dashboard in a support in the shape of a whirlwind, or tourbillon, the hallmark of the Girard-Perregaux brand.

This unique piece suggests the link between the worlds of prestige cars and outstanding watch-making. Cult objects that transcend their function to arouse emotions that are constantly renewed. Pininfarina and Girard-Perregaux: outstanding watches and cars share numerous common denominators: the notion of time, a fundamental factor of motor racing; increasingly refined techniques; and ever-present passion. In these two worlds, admiration for historical models goes hand in hand with the appeal of the most recent performances; the classic design shares the stage with daring concepts; cutting-edge technologies and noble materials are the key words of every successful innovation. High standards of quality, beauty, power and perfection even in the smallest detail, are essential components.

Girard-Perregaux bases its relationship with Pininfarina on a common conceptual approach, underpinned by a striving for excellence, emotions and beauty. And when passion encounters technical capabilities, the dream takes shape, producing the most refined mechanical structures.

 

[Merc1]

M

 

[ducati1482]

Hyperion is a one-off custom-built car created by Pininfarina Special Projects Division for collector Roland Hall. Derived from the Rolls-Royce Drophead Coupe, it features elegant lines and proportions and technology derived from luxury boat building.

Mr. Roland Hall, client and owner of the Hyperion, has decided to dedicate this car to Andrea Pininfarina's memory, remembering his outstanding human and professional qualities. "A car as extraordinary as the man who left us, but who will remain with us forever."

From the official Press Release:

Presented at the Pebble Beach Concours d’Elegance, the car is named after Hyperion, one of the Titans of Greek mythology, to underline its architectural and figurative power.
It is not the first time that the Pininfarina Special Projects Division has designed a unique car from a standard production model.
In the recent past Pininfarina has reinterpreted Ferrari engineering, as in the case of the P4/5 of collector Jim Glickenhaus, or Peter Kalikow’s Scaglietti “K”.

In the case of the Pininfarina Hyperion, Roland Hall, a collector and the owner of a Rolls-Royce Drophead Coupe, asked Pininfarina to create a custom-built car that would evoke the appeal of the sumptuous cars of the 1930s.
It might seem paradoxical, but today more than ever before, there is a desire on the part of a very elite clientele to return to the idea of the car as an artistic expression. As it was in the 1950s.
With the Hyperion, the team of designers and engineers of the Special Projects Division was able to express its creative skills and to apply Pininfarina expertise without limits, save that of coming as close as possible to the type of car that our customer had in mind.

The result was a custom-built unit that is firmly rooted in the values of the Pininfarina and Rolls-Royce brands, with lines and dimensions that are hard to find in a 21st century model.
The Hyperion takes up the legacy of other Rolls-Royces designed by Pininfarina, the Silver Dawn saloon of 1951, for example, or the Camargue coupe of 1975.
The concept

The history of Pininfarina offers plenty of examples of special cars built on “noble” bases. Which is why the company naturally welcomed Roland Hall’s proposal to work on a Rolls-Royce floorpan.
For the new Pininfarina one-off, however, the Special Projects Division wanted a new idea, something absolutely unique, which only an individual in love with the car as an abstract, and not merely utilitarian, concept could appreciate. And so the Hyperion project was born, in the Autumn of 2007.

In terms of the styling, the first brainwave came when thinking of some of the cars of the 1930s, with their majestic, regal bonnets, and a body that surrounded the driver and a single passenger.

Distinctive features of a car which, thanks to its strength and elegance, does not need to move to draw attention to itself.

"Like all the cars designed by Pininfarina, the secret of the Hyperion lies in its absolute harmony between masses and volumes, and the perfect balance of every proportion."
Structurally, we moved the driving position further back (400 mm) and took out the rear seats. We designed a new hood, which folds behind the seats under a wood-lined cover. In front of the windscreen we created two compartments for small items or for sports equipment, such as Mr. Hall’s hunting rifles.
The bodywork is made of carbon fibre, while the details are applied using a technology adopted in boat building. The doors were made of solid wood by craftsmen who specialise in creating components for luxury boats.

This is another aspect of the programme of Pininfarina special cars: offering customers unique stylistic and technical solutions that are not possible on mass produced cars.

The Phantom Drophead Coupé that served as a basis for the Hyperion

Some of the best international firms contributed to the realisation of the project: Re Fraschini for the carbon, Isoclima for the glazed surfaces, Proxi engineering for the drawings of the car, Triom for the lights and headlights, Fondmetal for the wheel rims, and Materialise for components created using fast prototyping.
"Romantic and noble. These two words sum up the styling of the Hyperion."
The archetype of the special car, an opulent two-seater roadster that conveys the luxury of the Rolls-Royce Drophead Coupé, from which it derives, at the highest figurative and architectural levels.
At the same time, it harks back to the past, and the cars of the pre-war period that now populate the world’s most prestigious concours d’elegance.
To repeat the proportions of those unforgettable cars (a short tail end and majestic bonnet that “surges” forward), we had to extend the roof and shorten the rear end.
To balance the volumes, the Pininfarina designers tried to achieve soft, fluidly flowing surfaces. The front sports the classic Rolls-Royce grille, which has been slightly inclined.
A trapezoid plane creates a more aerodynamic dashboard, while the recessed Bixenon headlights and LED technology convey sportiness and elegance.
The spectacular bonnet is underlined by the muscular, taut wings, while the line that embraces the front wheels is drawn back until it disappears into the hood cover, giving a sense of movement even when the car is stationary.
This feature is counterbalanced by a small tooth under the door that runs towards the rear wheel. The shape of the rear end recalls Pininfarina’s legendary sports “berlinettas” of the Fifties and Sixties, with their cut-off tails, strongly inclined downwards, with a flat closure borrowed from boat-building.

The interiors were practically unchanged, maintaining the perfect sense of high luxury in the passenger compartment that distinguished the original car.

One precious detail of the instrumentation underlines the unique environment: the watch designed specifically for the Hyperion by Girard-Perregaux, which can be removed from the dash and attached to a bracelet to be worn on the wrist.
(Source: Pininfarina

 

[Rainer271]

Rolls-Royce Hyperion offered for sale in the United Arab Emirates

If you have €1,730,000 ($1,935,155 at current exchange rates) lying around in your account, you could do lots of things with that kind of dough. Buy a place in Monte Carlo, a yacht, go on a long trip around the world, buy a fleet of cars and start your own rental company, lose everything in Las Vegas, the possibilities are infinite.However, if you’re in the market for a special means of personal transportation, look no further than the Rolls-Royce Hyperion. It’s a one-off model and I know what you’re thinking right now. “Why is it so droopy eyed?”Pininfarina is the one to blame or thank for the shape of the headlights, depending on which side you’re on. To be honest with you, the design of the Hyperion is fine by me. It sort of reminds me of the Rolls-Royce Silver Cloud III with the Chinese Eye design.

The story of the Hyperion started in 2008 when the Phantom Drophead Coupe-based creation was presented at the Pebble Beach Concours d’Elegance. According to Rolls-Royce, the Hyperion was commissioned by a gentleman who had €4.5 million (approximately $6 million) to spare on a one-off luxury car. As noted beforehand, the exterior is 100 percent the work of Carozzeria Pininfarina, an Italian coachbuilder that often lends its know-how to Ferrari.

Believe it or not, the bodywork is made of carbon fiber. How about that for a Rolls-Royce? Other than the dissimilarities in exterior design, the Rolls-Royce Hyperion differs from the Phantom Drophead Coupe inside too. The biggest difference is that the Hyperion is a strict two-seat convertible while the Phantom Drophead Coupe can entertain you and three of your buddies.

Albeit controversial, there is something that can’t be denied about the Rolls-Royce Hyperion. That is the artistic expression of this car. If you are one of those lucky few who can afford such a majestic machine, you might want to book a ticket to Dubai because that’s where the Hyperion is located at the present moment.

Rolls-Royce Hyperion Offered for Sale in the United Arab Emirates

 

[Centurion]

It's an distinguished collectors piece but that given that depreciation, £4.5m to £1.7m, I am not sure it's worth collecting.

 

[SDNR]

It's an distinguished collectors piece but that given that depreciation, £4.5m to £1.7m, I am not sure it's worth collecting.

It is extremely difficult to justify this astronomical price. I would love to see more one-off cars from Rolls-Royce, Bentley, Ferrari; even Porsche, BMW, and Mercedes but these crazy prices will prevent that.

 

[sako97]

Rolls-Royce Hyperion offered for sale in the United Arab Emirates

If you have €1,730,000 ($1,935,155 at current exchange rates) lying around in your account, you could do lots of things with that kind of dough. Buy a place in Monte Carlo, a yacht, go on a long trip around the world, buy a fleet of cars and start your own rental company, lose everything in Las Vegas, the possibilities are infinite.However, if you’re in the market for a special means of personal transportation, look no further than the Rolls-Royce Hyperion. It’s a one-off model and I know what you’re thinking right now. “Why is it so droopy eyed?”Pininfarina is the one to blame or thank for the shape of the headlights, depending on which side you’re on. To be honest with you, the design of the Hyperion is fine by me. It sort of reminds me of the Rolls-Royce Silver Cloud III with the Chinese Eye design.

Not sure why this is newsworthy; it's been sitting in Alain Class' inventory since 2009. It's overpriced for what it is.

 

[Mr Robert]

It's closing in on the real value. This Lexus SC430 abomination is horrendous and should level well below the car upon which it is based.